SPA514G Configuration Utility


System Information
Connection Type:	DHCP	Current IP:	192.168.1.120
Host Name:	SEPA4934CFEC182	Domain:	lan
Current Netmask:	255.255.255.0	Current Gateway:	192.168.1.254
Primary DNS:	192.168.1.254
Secondary DNS:

Reboot History
Reboot Reason 1:	Link Down(02/19/2003 00:40:47)	Reboot Reason 2:	Provisioning(01/01/2003 15:42:36)
Reboot Reason 3:	Provisioning(01/01/2003 15:38:20)	Reboot Reason 4:	Provisioning(01/01/2003 15:37:37)
Reboot Reason 5:	Provisioning(01/01/2003 15:35:15)

Product Information
Product Name:	SPA514G	Serial Number:	CCQ1811001H
Software Version:	7.6.1w	Hardware Version:	1.0.0
MAC Address:	A4934CFEC182	Client Certificate:	Installed (1024 bits)
Customization:	Open	Licenses:	None

Phone Status
Current Time:	1/29/2003 07:09:26	Elapsed Time:	27 days and 19:09:26
Broadcast Pkts Sent:	93	Broadcast Bytes Sent:	5860
Broadcast Pkts Recv:	766761	Broadcast Bytes Recv:	51111254
Broadcast Pkts Dropped:	0	Broadcast Bytes Dropped:	0
RTP Packets Sent:	0	RTP Bytes Sent:	0
RTP Packets Recv:	0	RTP Bytes Recv:	0
SIP Messages Sent:	90600	SIP Bytes Sent:	31991257
SIP Messages Recv:	90421	SIP Bytes Recv:	27872991
External IP:		Operational VLAN ID:	N/A
SW Port:	100M Full Duplex	PC Port:	Link Down

Ext 1 Status
Registration State:	Not Registered	Last Registration At:
Next Registration In:		Message Waiting:	No
Mapped SIP Port:		Hoteling State:	Disabled

Ext 2 Status
Registration State:	Not Registered	Last Registration At:
Next Registration In:		Message Waiting:	No
Mapped SIP Port:		Hoteling State:	Disabled

Ext 3 Status
Registration State:	Registered	Last Registration At:	1/29/2003 07:02:31
Next Registration In:	53 s	Message Waiting:	No
Mapped SIP Port:		Hoteling State:	Disabled

Ext 4 Status
Registration State:	Not Registered	Last Registration At:
Next Registration In:		Message Waiting:	No
Mapped SIP Port:		Hoteling State:	Disabled

Line 1 Call 1 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 1 Call 2 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 2 Call 1 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 2 Call 2 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 3 Call 1 Status
Call State:	Idle	Tone:	None
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 3 Call 2 Status
Call State:	Idle	Tone:	None
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 4 Call 1 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Line 4 Call 2 Status
Call State:		Tone:
Encoder:		Decoder:
Type:		Remote Hold:
Callback:		Peer Name:
Peer Phone:		Duration:
Packets Sent:		Packets Recv:
Bytes Sent:		Bytes Recv:
Mapped RTP Port:		Media Loopback:
Decode Latency:		Jitter:
Round Trip Delay:		End System Delay:
Packets Lost:		Packet Error:
Loss Rate:		Discard Rate:
Burst Duration:		Gap Duration:
R Factor:		MOS Listening:
MOS Conversational:

Downloaded Ring Tone
Status:	Idle
Ring Tone 1:	Not Installed
Ring Tone 2:	Not Installed

TR-069 Status
TR-069 Feature:	Disabled	Periodic Inform Time:	20 s
Last Inform Time:	0/0/0 00:00:00	Last Transaction Status:
Last Session:	0/0/0 00:00:00 - 0/0/0 00:00:00	ParameterKey:

Custom CA Status
Custom CA Provisioning Status:
Custom CA Info:	Not Installed


System Configuration
Enable Web Server:		User Password:
Signaling Protocol:

Internet Connection Type
Connection Type:

Static IP Settings
Static IP:		NetMask:
Gateway:

Optional Network Configuration
HostName:		Domain:
Primary DNS:		Secondary DNS:
DNS Query Mode:		Syslog Server:
Debug Server:		Debug Level:


Response Status Code Handling
SIT1 RSC:		SIT2 RSC:
SIT3 RSC:		SIT4 RSC:

RTP Parameters
RTP Port Min:		RTP Port Max:

SDP Payload Types
AVT Dynamic Payload:		G726r16 Dynamic Payload:
G726r24 Dynamic Payload:		G726r40 Dynamic Payload:
G729b Dynamic Payload:

Linksys Key System Parameters
Force LAN Codec:


Control Timer Values (sec)
Call Back Expires:		Call Back Retry Intvl:

Vertical Service Activation Codes
Call Return Code:		Blind Transfer Code:
Call Back Act Code:		Call Back Deact Code:
Cfwd All Act Code:		Cfwd All Deact Code:
Cfwd Busy Act Code:		Cfwd Busy Deact Code:
Cfwd No Ans Act Code:		Cfwd No Ans Deact Code:
CW Act Code:		CW Deact Code:
CW Per Call Act Code:		CW Per Call Deact Code:
Block CID Act Code:		Block CID Deact Code:
Block CID Per Call Act Code:		Block CID Per Call Deact Code:
Block ANC Act Code:		Block ANC Deact Code:
DND Act Code:		DND Deact Code:

Miscellaneous
Set Local Date (mm/dd):		Set Local Time (HH/mm):
Time Zone:		Time Offset (HH/mm):
Ignore DHCP Time Offset:		Show DTMF Digits When Connected:


General
Station Name:		Station Display Name:
Voice Mail Number:		Text Logo:
BMP Picture Download URL:
Select Logo:		Select Background Picture:
Softkey Labels Font:		Screen Saver Enable:
Screen Saver Wait:		Screen Saver Icon:

Line Key 1
Extension:		Short Name:

Line Key 2
Extension:		Short Name:

Line Key 3
Extension:		Short Name:

Line Key 4
Extension:		Short Name:

Miscellaneous Line Key Settings
Line ID Mapping:		Line Navigation:
Call Appearance Per Line:		Softkey Navigation Style:

Ring Tone
Ring1:
Ring2:
Ring3:
Ring4:
Ring5:
Ring6:
Ring7:
Ring8:
Ring9:
Ring10:
Ring11:
Ring12:

Audio Input Gain (dB)
Handset Input Gain:		Headset Input Gain:
Speakerphone Input Gain:		Handset Additional Input Gain:
Headset Additional Input Gain:		Speakerphone Additional Input Gain:

Broadsoft Settings
XSI Host Server:		Directory Name:
Directory Type:		Directory UserID:

XML Service
XML Directory Service Name:
XML Directory Service URL:
XML Application Service Name:
XML Application Service URL:
XML User Name:		XML Password:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Proxy:
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Proxy:
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


General
Line Enable:		Restrict MWI:

NAT Settings
NAT Mapping Enable:		NAT Keep Alive Enable:

SIP Settings
SIP Port:		SIP Debug Option:

Call Feature Settings
Message Waiting:		Default Ring:
Mailbox ID:		User ID with Domain:
Auto Ans Page On Active Call:		Feature Key Sync:
Enable Broadsoft Hoteling:		Hoteling Subscription Expires:

Proxy and Registration
Register:		Make Call Without Reg:
Register Expires:		Ans Call Without Reg:

Subscriber Information
Display Name:		User ID:
Password:		Use Auth ID:
Auth ID:

Audio Configuration
Preferred Codec:		Use Pref Codec Only:
Second Preferred Codec:		Third Preferred Codec:
Silence Supp Enable:		DTMF Tx Method:


Call Forward
Cfwd Setting:		Cfwd All Dest:
Cfwd Busy Dest:		Cfwd No Ans Dest:
Cfwd No Ans Delay:

Speed Dial
Speed Dial 2:		Speed Dial 3:
Speed Dial 4:		Speed Dial 5:
Speed Dial 6:		Speed Dial 7:
Speed Dial 8:		Speed Dial 9:

Supplementary Services
CW Setting:		Block CID Setting:
Block ANC Setting:		DND Setting:
Secure Call Setting:		Dial Assistance:
Auto Answer Page:		Preferred Audio Device:
Time Format:		Date Format:
Accept Media Loopback Request:		Media Loopback Mode:
Media Loopback Type:		Text Message:
Text Message From 3rd Party:		Alert Tone Off:
Log Missed Calls for EXT 1:		Log Missed Calls for EXT 2:
Log Missed Calls for EXT 3:		Log Missed Calls for EXT 4:
Shared Line DND Cfwd Enable:

Audio
Ringer Volume:		Speaker Volume:
Handset Volume:		Headset Volume:
Handset Version:		Deep Bass:
EHS Type:		Speakerphone Enable:

LCD
LCD Contrast:		Back Light Timer:


TR-069
Enable TR-069:		ACS URL:
ACS Username:		ACS Password:
Connection Request Username:		Connection Request Password:
Periodic Inform Interval:		Periodic Inform Enable:
TR-069 Traceability:		CWMP V1.2 Support:
TR-069 VoiceObject Init:		TR-069 DHCPOption Init:
TR-069 IGD Support:		TR-069 Fallback Support:
TR-069 DHCP Inform Timer:		BACKUP ACS URL: